Conductivity/TDS Controller PSC-150

Untuk pemesanan dan informasi lengkap produk Conductivity/TDS Controller PSC-150, silahkan hubungi kami melalui :



Monitors and controls TDS levels for high output commercial systems.
Large, bright LED display.
An alarm will sound if the TDS level rises above the user-set level.
On-screen temperature display (C/F).
Installs easily in minutes.
Includes one sensor probe (at no extra cost).
Protective cover also available (sold separately)


EC Range: 0-9999 µS; TDS Range: 0 – 5000ppm
Temperature Range: 1-75°C; 33-167 °F
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Resolution: 0.1µS/ppm (0-999); 1µS/ppm (1000-9999)
ATC: Yes (1 – 65°C)
Calibration: Adjustable (manual)
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm/µS level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device.
Relay Voltage: 5V
Alarm: Optional steady beep (set by user)
Display: Bright 5/8″ L.E.D. display
Probe: 1/2″ bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 680.4 g (1 lb 8 oz)



  • 5★ 0
  • 4★ 0
  • 3★ 0
  • 2★ 0
  • 1★ 0


Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Conductivity/TDS Controller PSC-150”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *